|
BATTERY SELECTION
Specifications and tools Batteries Batteries-stating the technical features according to their specifications brochure on our web site listed in our catalog and will be used between the desired and correct according to the battery can be selection. Measurements, flow and capacity for cold starters are the most important selection criteria. The above method according to dry batteries need water and process for charging .Technics Support Maintenance and Service of SOYTURK BATTERY Authorized dealers can receive support.
Technical Information ABOUT ASSEMBLY
Water charged battery in waiting, when average daily temperature of less than 4C'den Volt and below the open circuit voltage in 12:50 according to the above method should be re-charged .. Ambient temperature is high open circuit voltage falls below 12.40 volts and still be charged according to the method. Before removing the old battery in exchange battery to make a connection to the new battery cables + / - to be marked. (Color Koblo code for non-car) Battery voltage by measuring the value and the direction is correct, make sure the cable connections and battery tray, and carefully check to clear. Insert the new battery and insert and tighten connections. Positive (+) cable to connect first. Then the negative (-), connect the cable grounded. Tighten carefully. Excessive compression of damage per pole of the battery polarity is compressed be especially careful. Per pole and the cable ends to the plate with preservatives against rust. (The Technical Specification for Protective Protective Greases the Bold derivative oils) electrolyte levels only pure water should be reduced to the accumulator.
|
