Battery should not have dirt on the surface.
Battery box should not be cracked.
Pole should not be the beginning of oxidation.
Electrolyte level should be on the plate of 1-1,5 cm.
Elements of the holes on the dust cover, sure to open links edilmelidir. Loose must bored
In contrast to the extreme cold of the high temperature, known more will damage the battery. The best protection against unusual weather conditions your battery is fully charged to keep. In addition to terminals and relax against oxidation by periodically to check, and cold weather, especially in a closed garage at night to keep your car, your car battery to get maximum performance with a long time.
The breakdown of the vibration caused in battery most are faced with. Not allowed to shake the battery has been installed and connection to be especially careful of your firmness. In our country, the extreme heat and extreme cold and the roads have been developed by the state against the plaque design and special Happy alloy provides much better performance.
Used batteries; hear say information, re-use and heating purposes, or other various methods to revive, is trying to strengthen, to leak, explosion or lead to side, and both your vehicle and more importantly, may cause you harm absolutely not recommend .Batteries polar heads, terminals and related parts lead, lead and other chemicals includes combinations. Not to cause serious health problems after working all kinds of batteries and plenty of hand soap and water are always running around Always washing Battery protection goggles on, the hydrogen gas mask and gloves takın.Battery is extremely side. Charging in goodventilation .Spark, flames, burning cigarettes, welding, friction and static electricity to discharge any kind will lead to other flammable objects away from the battery and hold factors. Otherwise, the gas fire and explode. Also occur during maintenance can prevent the spark to be first grounded cable connection be removed and still the latest as of this point to be inserted must be.Veheciles disassemble a battery while ago (-) with negative polarity Remove head, the car battery before you insert the (+) positive polarity of the head connect. Do not directly connect or disassemble the circuit during charging. To avoid sparking headlines connecting the cable or charger before removing the test device always Battery any Shut Down .Water Do not tilt sideways more than 45 ° C. Batteries contain sulfuric acid that can cause serious burns, in contact with acids, contact with the wash water and soap. In the case of the eye, washing away acids immediately after the medical help.Charged of control, test or make a connection to the battery from the battery when the battery on the battery charging watch.Frozen before warming up to 15 ° C''for voltage waiting .Battery is in the right direction without seeing that the tool wear.
1) Battery is in your group if you use the battery well maintained, depending on your situation (especially the year more than 20,000 km's) on a regular basis every 3 months your battery electrolyte level is authorized to check on your service. Please note that your battery level is the lack of extra pure water is required. For any liquid other than pure water do not use this process.
2) Battery is not in your group groomed battery (Sb / Ca), but annual km> 20,000 in the same way again, make sure you check the 3-month periyodlarda service.
3) All technical services always in control of the tightness of battery clamps per pole or to check the status of oxidation. Please note that next to your battery to loose clamps kutupbaşının until melted and can lead to negativity may extend. If oxidation in handcuffs, if this necessarily wash in hot water with the polar head of expenditure to be oxidized. Otherwise, the additional resistance due to oxidation is not charging your car battery may cause.
4) Pole after cleaning the head and clamp the air per pole with petroleum jelly, such as cutting theme to be to stop oxidation of the materials You can pole. Grease or oil instead of petroleum jelly time derivative of this point in time with the contaminated dust to create regions and may lead to the formation of additional resistance. Oil application is to be made in an area protected from the dust of your batteries whether notice was placed.
5) Technical services for maintenance of your car battery voltage is checked. 1 hour after this control when the engine cools you will see the battery's actual voltage value. If the voltage value between 12,40-12,60 volt 3-6 hours to disassemble the battery 1 / 20 Cn (battery capacity of 1 / 20 value is charged with.) Charge 1 hour after the end of the battery voltage will waiting battery. If battery voltage> 12.70 volts to the charging end. If the battery is charging the battery at Despite not reaching the desired value of breakdown maintenance is done. (Battery or so on your sullphat There may be formation)
|
